Mid-America Door

How-To
* WARNING * Garage doors use torsion or extension springs to counter balance the weight of the door. Never under any circumstances attempt to adjust, repair, remove or install any spring assembly, bottom fixtures, spring anchor, cables, pulleys, or any other component under spring tension. Contact a professional for help. Failure to do so could result in serious injury or death.
		Door Jamb Preparation
Get the free Adobe Reader here	Planning is one of the most important steps in installing a new Mid-America Door garage door. Here you will find the resources you need to install your door properly.
		Enlarge/Print this illustration

	Steps 1-3: Measure the door opening Installing the first Section Installing the inside lock or key lock assembly	Measuring the door opening
	Step 4: Installing the Handle and Step Plate

	Steps 5-7: Installing the Remaining Sections Installing the Vertical Track Installing the Horizontal Track and Back Hanger
	Steps 8-9: Installing Struts Installing Lock Bar Guide
	Spring Assembly: Normal Headroom Extension Spring Normal Headroom Torsion Spring with Tubing Low Headroom Front Mount Torsion Low Headroom Rear Mount Torsion
	Track Dimension Clearance Diagrams: Standard Lift Track Vertical Lift Track High Lift Track Low Headroom Track Follow the Roof Track - Standard Lift Follow the Roof Track - High Lift	Enlarge/Print this Illustration

	Maintenance of Your Mid-America Door Garage Door The hardware and door components have been engineered and designed for many years of continuous operation, however; it is a good idea to periodically check for: Loose bolts on hinges Bent hinges Bent or broken rollers Track brackets bolts Visually inspect cable for frays Visually inspect bottom bracket for wear If you notice that bolts or any other components are broken, contact your local installer for service. Lubrication: Using light lubricating film or houshold oil, it is a good idea once a year to lubricate the following: Lifting lug on the bottom fixture Pulley bearings Steel rollers Torsion spring (entire spring) DO NOT lubricate the track or nylon rollers
	Home \| Products \| Contact Us \| FAQs \| How-To \| About Us \| Careers 1.800.364.3667 - 1001 West Hartford Avenue- Ponca City, OK 74601